Custom Wooden Crates and Pallets for KL & Selangor
We manufacture custom wooden crates, plywood crates and pallets to suit your goods' dimensions, packed weight, lifting method and transport journey. From our factory in Rawang, Selangor, we support manufacturers, warehouses and exporters arranging custom wooden packaging in KL and Selangor. Optional ISPM 15 heat treatment is available for eligible export packaging.
Whether you need a machinery crate, an enclosed plywood box or a specially configured pallet base, we can review your item and proposed packaging specification before manufacture.
- Made-to-order wooden and plywood crates
- Open, enclosed and combined pallet-and-crate options
- Forklift access and internal supports where required
Share your dimensions, approximate weight and a photo or drawing to begin discussing your requirements.
Which crate or box suits your goods?
The right format depends on how much access, enclosure and base support your goods require. We manufacture different wooden packaging arrangements rather than treating every shipment as the same type of crate.
Not sure which construction to choose? We can help compare open access, panel coverage and base support once we know the load and handling method. If you need support without a complete crate, our custom-made pallet and crate arrangements can also be discussed as a base-only requirement.
How do we choose the crate construction and lifting access?
We review the goods, their support points and the way they will be moved before cutting timber. Your measurements, weight information and handling instructions help us agree on a practical crate specification.
| Design factor | What you need to decide | What we review |
|---|---|---|
| Packed dimensions and clearances | Provide the item's length, width and height, packing orientation and clearance needed for projections, accessories or access. | We review the proposed internal dimensions, base footprint and surrounding crate structure against your measurements. |
| Weight distribution and centre of gravity | Confirm the approximate packed weight and identify any concentrated loads, uneven balance or sensitive support areas. | We consider where the goods need support and whether internal blocking, bracing or a particular base arrangement should form part of the design. |
| Forklift and lifting positions | Identify the handling equipment, lifting direction, contact points and any equipment clearance restrictions. | We assess suitable forklift-entry arrangements, including two-way or four-way access where applicable, and the required lifting positions. |
| Visibility, ventilation and coverage | Decide whether the goods require visual access, ventilation, inspection openings or fuller external enclosure. | We discuss an open or slatted timber crate, a more enclosed wooden box or a plywood-panel structure according to those requirements. |
01. Packed dimensions and clearances
Your informationItem length, width, height, packing orientation and required clearance.
Our reviewInternal crate dimensions, base footprint and available space around the goods.
02. Weight and centre of gravity
Your informationApproximate packed weight, uneven load distribution and important support points.
Our reviewBase arrangement and whether blocking, bracing or additional support should be specified.
03. Forklift and lifting access
Your informationLifting equipment, entry direction, lifting points and relevant clearances.
Our reviewSuitable forklift-entry positions and two-way or four-way access where applicable.
04. Visibility and exterior coverage
Your informationNeed for ventilation, visual inspection, access or fuller enclosure.
Our reviewOpen timber construction, enclosed wooden boxes or plywood-panel options.
What about internal supports and custom pallet bases?
Internal blocking or bracing can be included when the packed item needs a specified support or restraint arrangement. We discuss the position and purpose of these components using your drawings, photographs and handling information.
Forklift-entry bases are also selected according to the lifting equipment and movement path. Neither internal bracing nor a particular forklift configuration is automatically included in every crate.
For a closer look at the production stages, see our custom crate manufacturing process below.
This open crate shows how the base and side members form the packaging structure. Internal supports for the goods are considered separately as part of the agreed specification.
What happens between specification and delivery?
We move from reviewing your requirements to timber preparation, assembly, final inspection and coordinated dispatch. Each stage is intended to keep the finished packaging aligned with the agreed construction.
Our Rawang manufacturing workflow includes incoming timber inspection, cutting, assembly, trimming, cleaning and final quality checks.
If your goods need a special base footprint, lifting position, marking or painting, those requirements should be discussed before production.
Review the requirement
We review dimensions, weight, lifting positions, quantity and destination so the proposed construction can be discussed before production.
Inspect and cut timber
We check timber materials and cut components according to the agreed measurements, supporting consistent preparation.
Assemble the structure
We assemble the base and crate components according to the specified arrangement, including agreed handling features.
Trim, clean and inspect
Finished packaging undergoes trimming, cleaning and final checks against the agreed workmanship and construction requirements.
Coordinate dispatch
We discuss the receiving address, delivery arrangements and unloading needs before dispatch is coordinated.
Before delivery: Please confirm the receiving-site address, receiving hours, vehicle access and available unloading facilities. These details help us coordinate the actual order. Learn more about our wooden packaging delivery service.
Can the crate be prepared for export?
Yes. We offer optional ISPM 15 heat treatment for eligible solid-wood packaging used in export shipments. We can review which parts of your proposed wooden crate require treatment and issue the applicable certification after the required treatment is completed.
Does plywood packaging need heat treatment?
Packaging made wholly from processed plywood may fall outside the ISPM 15 treatment requirement. However, a plywood-panel crate that also includes solid-wood runners, framing or other solid-wood components needs those components assessed separately.
The appropriate arrangement depends on the packaging materials, shipment destination and applicable importer or receiving-country requirements. These should be confirmed before the crate specification is finalised.
See our ISPM 15 heat treatment service for eligible wooden packaging and our treatment process.
Malaysian MAHTAS Heat-Treatment Accreditation
HHL 88 Manufacturing Sdn. Bhd. is listed by Malaysia's Department of Agriculture under MAHTAS heat-treatment code MY-114 HT.
The December 2025 participant list records accreditation validity through 31 December 2030.
Important: This accreditation relates to heat-treatment capability. It does not mean that every crate we manufacture is automatically treated or certified.
Reference: Department of Agriculture Malaysia, MAHTAS participant list, December 2025 . Packaging material distinctions are addressed in the Malaysian wood packaging guidance . Destination-specific requirements must still be checked for each shipment.How does HHL 88 support KL-area crate orders?
Our factory and warehouse are based in Rawang, Selangor. We discuss made-to-order wooden crate requirements and suitable delivery arrangements with customers in Kuala Lumpur, Selangor and surrounding target areas.
We can review enquiries involving Klang Valley, Negeri Sembilan and Bentong, with the actual route and delivery arrangements considered for each order and destination.
Our in-house transport fleet supports coordination of wooden packaging dispatch. Vehicle arrangements, route suitability, unloading requirements and delivery scheduling depend on the confirmed order.
If your receiving facility has restricted access, specific operating hours or special unloading arrangements, please let us know when discussing the requirement.
For our factory address and enquiry details, contact HHL 88 .
Rawang, Selangor
HHL 88 Manufacturing Sdn. Bhd.
Lot 3, Jalan Perusahaan 1,
Batu 17, Jalan Ipoh,
Kawasan Perindustrian PKNS,
48000 Rawang, Selangor, Malaysia.
Areas we can discuss for orders
Delivery availability, transport arrangements and scheduling are discussed against the actual order, receiving location and site requirements.
Why work with HHL 88 for a custom crate?
A custom crate order needs more than a size estimate. The finished structure must reflect the agreed goods, handling method and shipment requirements. Here is how our manufacturing and related services support that process.
Made-to-order construction in Rawang
We manufacture custom wooden pallets, boxes and crates at our Rawang facility. This is useful when the goods have non-standard dimensions, unusual weight distribution or specified handling requirements.
A defined manufacturing workflow
Our timber inspection, cutting, assembly, trimming, cleaning and final-check stages help us work towards the agreed construction and workmanship requirements.
Export-treatment and delivery support
When relevant to your order, we can discuss optional heat treatment for eligible solid-wood packaging and coordination of packaging delivery. Both are considered according to your shipment and destination needs.
Frequently asked questions
These are common details to clarify when arranging a custom wooden crate, machinery crate or plywood box for your goods.
Can a crate include a pallet base and forklift entry?
Yes. We manufacture combined pallet-and-crate structures and can plan forklift-entry positions around your lifting equipment, load and required access direction.
Can HHL 88 build a crate from our drawing?
We can review your drawing and measurements for made-to-order manufacture. Please also provide the estimated packed weight and handling details so the final specification can be discussed.
Is a plywood box automatically exempt from ISPM 15?
No. A package made wholly from processed wood may qualify for exemption, but solid-wood runners or framing must be assessed. We can review the packaging materials and relevant treatment needs.
Can internal blocking or bracing be included?
Yes. Internal blocking and bracing are available construction options. We discuss their suitability based on the packed item, support points and handling requirements.
Can HHL 88 deliver a custom crate to a KL receiving site?
We offer wooden packaging delivery and can discuss the KL receiving address, route, vehicle access, unloading facilities and schedule for your order.
Need a custom wooden crate for your next shipment?
In summary, we manufacture wooden and plywood crates, custom pallets and combined structures around your goods' size, weight and handling requirements. Our team can review your requirements and provide a quotation for a proposed packaging solution.
Please send your item's dimensions, approximate packed weight, a photo or drawing, required quantity, lifting method, delivery destination and preferred date.
Our team will review the information provided before discussing the proposed specification and quotation.